| Subject | Text |
| Usually, it is difficult to identify small hole mounted diodes with a such simple marking code.
But |
| Sony TV Model KV-32Ws2V | The fault is as follows:on switch-on the degauss circuit operates but there is no sound or vision, a |
|
|
| SONY VPH-1031Q power Supply board(GA) | Projector worked fine for 8 years, but now its not powering up. I traced the problem to the GA boar |
| FET ratings needed for MX705 monitor | I'm an amateur hobbyist trying to fix a friend's dead MX705 17-inch CRT monitor. It's made by Top Vi |
| [quote:2dbe6cb9be="jts1957"]IF it's even bad at all.
You DID test the original?[/quote:2dbe6cb9be |
| Have been out of consumer electronics for some time...I used to see this problem on a regular bases |
| Hi | I think you are right to say that there is a short circuit, but the question is what could have caus |
| Electronic Circuits Software, PIC, PCB, Electrical CAD Softw | Free Electronic Circuits Software Download
PIC Software, PCB designer, Circuit designer, Microchi |
| Chances are your CRT has weak emision on one or more colors. I have had prety good luck restoring th |
| Usage of FADOS7F1 | FADOS7F1 is a double-channel VI tester. While using TEST feature, comparison can be applied without |
| Beko tv | Lissen whippersnapper!- how do you know your ir works- have you got a tester?- most likely here is t |
| [quote:47de80044e="Anonymous"]Your CRT is getting a layer of dead material on the cathodes of each g |
| Question about testing Hor O/P | I'd like some feedback as to some methods to test Horizontal output stage.
After changing all fault |
| Samsung TXN3271HFX TV Blows 5 Amp A/C Fuse instantly | :roll: I'm having a problem with a Samsung TXN3271HFX TV Set.As soon as it's plugged in, the 5 Amp p |
| Brother MFC 440cn service manual? | Anyone has parts and service manual to Brother MFC 440 CN? Thanks a lot for any help! |
| Re: RCA CTC203CX - no video (no picture) but has menu and so | pls find the tuner and look the b+ and use tester and calculate the b+ plus of tuner. if there is no |
| Do not know about the specific schematic or unit, but I do know there has been some schematics float |
|
|
| May be a bad switch.
Unplug the lamp.
With a ohm meter or continuity tester, measure across th |
| Service manual for brother MFC 440CN | Hy All,
I would need a service manual for Brother printer MFC 440 CN.
Can anybody please upload |
| repair electronic card | The Best VI Tester and circuit analyzer: FADOS7F1 Fault Detector and PC Oscilloscope. You can search |
| you cannot ever determine a good device. any tester will tell you as good it is but not how good wil |
| First some blocks during mp3 playback after few weeks completly power-off.
Fuse are ok.
At first l |
| Liteon Monitor Cable J15AAC / Fujitsu CTM5005 | During a theft the integrated VGA cable was cut and the plug end stolen along with the base unit it |
| Testing the circuit is to be done with the power off!!
Do not apply power until you are sure you ha |
| Re: denon udra-77 | Hi
In case anyone else has this problem with other similar mini systems from Denon, I fixed the pro |
| Re: TFT Relisys TL766-RE | [quote:2bf9d7ad7e="Andreas Dei"]Hello
I have here a TFT monitor Relisys TL766-RE. In the Power Su |
| Thanks Ray I'll check to see if it's RY701 , any case you've pointed me in the right direction.
|
| The reading I’m getting 0.49r on both resistors is this ok or is it slightly high. Taking into consi |
| testing picofarad | Thanks for replying so fast.
I forgot to say: "Without buy another tester" if possible; |
| F/SELL BRAND NEW Panasonic 42" Wide Screen Plasma TV $6 | EGOLD ELECTRONICS PLC / BEST ELECTRONICS
COMPANY.
|